Dearation, preheating and precise dosing of dissolution media
Volumetric dispensing with an accuracy better than +/- 1% as per USP and Ph. Eur. requirements
Mobile unit allows media filling in the test vessel within the dissolution bath
Multifunction single hose for dispensing, aspiration, cleaning, rinsing and drainage
Ergonomically designed nozzle with embedded dispense switch for ease of operation
User friendly calibration and validation of media volumes
Report printout of calibration, validation and dispense cycle
Batch wise dispensing and stores last 10 batch information of media
Special nozzle design allows the handling of surfactants like Sodium Lauryl Sulphate (SLS)
Programmable dearation time and temperature for effective dearation of different media
Maintains media under vacuum at desired temperature while in idle condition
Easy access for manual cleaning of vessel tank
Automatic rinsing and cleaning cycle
Virtually no dead volume
Programmable dispensing volumes from 200 ml to 2 ltrs
Dispensing rate 900 ml/min
Specifications
Aspiration:
Media Volume: Programmable from 0.2 litre to 21 litres
Accuracy: +1%
Flow rate: 900 ml/min. (During run cycle)
Dispense:
Dispense Volume: Programmable from 0.2 L to 4 L
Accuracy: Better than +1%
Flow rate: 900 ml/min.
Temperature:
Temperature Range: 20oC to 50oC
Accuracy: +0.5oC
Media preparation time: 45 min. (For 21 L of media @ambient temperature 25o C) O2 level: Normal tap water which contains 85% of dissolved O2 before degassing will contain 40% of dissolved O2 after degassing (Measured by DO2 meter)